Nine services that cover every stage of an MRF lifecycle, from initial engineering through commissioning, control retrofits, and 24/7 emergency response. Built around a UL-508A panel shop and a service team that runs around the clock.
In-house mechanical, electrical, air, water, and general contracting, backed by a design team with deep MRF experience. Every system engineered around the operation.
Custom fabrication that integrates with the line. Chutes, platforms, guards, conveyors, and structural components built to your facility's unique specs.
More than 100 MRFs installed and commissioned domestically and internationally, from greenfield builds to full retrofits, including screens, conveyors, optical sorters, eddy currents, balers, robotics, and wastewater equipment.
UL-508A certified panel shop building control solutions for conveying equipment, water pump systems, ventilation, compactors, and more. Drop-in retrofits in days, not weeks.
Small-format recycling at your MRF: our patented glass cleaning system (US 7188730 B2) removes and separates contaminants from the glass stream, recovering shredded paper for resale and adding at least $10/ton to scrap glass value.
Preventive maintenance programs that extend equipment life and reduce unplanned downtime, keeping your facility running smoothly between major projects.
When the line goes down, we get it back online safely and quickly. 24/7 emergency response across most vendor equipment on the market.
We disassemble and remove obsolete equipment before starting projects, clearing the floor safely so the new system goes in on schedule, in accordance with permits and regulations.
Strategic advisory drawing on over 25 years of MRF and secondary processing experience. We monitor industry, regulatory, and market trends so our clients move first.
From conveyors and shaker screens to UL-508A control panels, cross-belt magnets, and our patented vacuum drop box and cyclone system. Every used piece of equipment we obtain is refurbished in-house, then installed and serviced by the Titus team. As one of the largest installers of recycled equipment, we maintain over $5 million in refurbished inventory ready for resale, with warranties included when Titus serves as your integrator.
Custom belt conveyors for material recovery facilities and recycling plants. Titus manufactures flat-slider, troughing roller, and combo-chain belt conveyors in-house, sized to your tipping floor and sort line throughput. New builds, retrofits, and refurbished units available, with warranties included when Titus serves as your integrator.
Titus's patented glass cleaning system (US 7,188,730 B2) recovers saleable cullet from contaminated MRF glass fines, without the water consumption, footprint, or downtime of conventional wet-wash systems. Designed, fabricated, and commissioned by Titus to add at least $10/ton in resale value to your glass stream.
Pulls containers and fiber off the line and separates them for downstream processing. Custom-sized airflow, MERV 13 filtration, and full integration with existing belt geometry. Designed and fabricated in-house.
Disc screens, ballistic separators, OCC screens, and shaker screens for material recovery facilities. Titus shaker screens use eccentric weights and perforated plate to remove fine dust, broken glass, and small mixed plastics from your material stream. Pair with our air knife and patented vacuum drop box and cyclone for complete contaminant removal.
Titus has been a UL-508A certified panel shop since 2012. We design, build, and commission turn-key control platforms that integrate balers, compactors, shredders, optical sorters, robotics, and conveyors into a single system. Every panel ships with Nema 12 enclosures, Siemens HMIs, Safety PLCs, ABB drives, and Ewon switches for remote access. Optional SCADA system with remote monitoring and reporting.
Refurbished and new horizontal balers for fiber, plastics, aluminum, and ferrous metals. Sized to your monthly throughput and the bale-grade specs your end markets require. Vendor-agnostic refurbishment, installation, and 24/7 service support across most MRF baler manufacturers.
Custom metering drums level the surges of inbound material onto MRF sort lines for better sorting and more consistent throughput. Smooth the load reaching your optical sorters, ballistic separators, and pickers. Engineered, fabricated, and installed by Titus to match your existing line geometry.
Both ceramic and electromagnetic cross-belt magnets for MRF conveyor systems. Mounted above the conveyor to pull ferrous metals off the recyclable stream before they reach optical sorters or balers, protecting downstream equipment and recovering a saleable commodity. Self-cleaning options available. Mounted, wired, and integrated by the Titus service team.
Custom sorting platforms and stairs designed and fabricated by Titus to service new or existing MRF equipment. Built with rigid structural channels that span longer distances while supporting themselves, engineered to integrate with conveyors, optical sorters, balers, and the geometry of your existing line.
Titus's patented portable secondary MRF (US 8,813,972 B1). A skidded sortation platform with feed hopper, vibratory screener, air classifier, high-speed conveyor, and dual-eject NIR optical sorter. Deployed at the Chicago Secondary Sort Demonstration to recover 79% of residual material that primary MRFs leave behind.
Replacement parts and components for MRF equipment. Sourced and stocked by Titus to support new builds, refurbishments, and emergency service.
Contact our purchasing department directly. Custom fabrication, field refurbishment, warranties included when Titus serves as your integrator.
Tell us about your facility and what you are trying to improve. We will route you to the right team.
Call (909) 357-3156 or send us a message.